Z1B 1975
11 Piece Decal Set

1 Chain Info
1 Tire & Load Data
1 Battery Caution
1 Brake Usable Range
1 Daily Safety Checks
2 Helmet Hook
1 Chain Warranty
1 Caliper Decal
1 Master Cylinder
1 Engine Oil

$32 US
#KZ1-75-900-WS

Z1A & Z1B
Warning Lamp Console & Key Holder
(2 pcs.)
$18 US
#KZ1-00-001AB

Z1A 1974 & Z1B 1975
Gauge Faces (decal)
KM Speedometer
$24 US pr.
#KZ1-745-900-GKM

Not sold separately

This decal must be applied over original gauge face to illuminate. Disassembly of speedometer and tachometer is required. Mounting holes are pre cut to simplify application. Hole for "stop lamp" on tachometer must be trimmed out after installation.

Removal of original information printed on OEM plastic face is required prior to application of these decals.

Z1B 1975
Gauge Faces (decal)
MPH Speedometer
$24 US pr.
#KZ1-74-900-1G
With STOP LAMP

Not sold separately

This decal must be applied over original gauge face to illuminate. Disassembly of speedometer and tachometer is required. Mounting holes are pre cut to simplify application. Hole for "stop lamp" on tachometer must be trimmed out after installation.

Removal of original information printed on OEM plastic face is required prior to application of these decals.

Z1B 1975
Gauge Faces (decal)
MPH Speedometer
$24 US pr.
#KZ1-75-900-2G
No STOP LAMP

Not sold separately

This decal must be applied over original gauge face to illuminate. Disassembly of speedometer and tachometer is required. Mounting holes are pre cut to simplify application. Hole for "stop lamp" on tachometer must be trimmed out after installation.

Removal of original information printed on OEM plastic face is required prior to application of these decals.

Description

Kawasaki Z1 900 1975 Z1B
Side Panel Badge

Chrome/Black/White

Description

Kawasaki Tank Badge for various models including Z1A/B KZ900 KZ1000A1/A2/D1/D3
186mm X 24mm

Chrome/Black/White

Screw holes are 140mm apart

Description

Kawasaki Tank Badge for various models including Z1/A/B, KZ900B1, KZ1000B1-B4/C1-C4
162mm X 22mm
Genuine Kawasaki Part

Chrome/Black/White

Screw holes are 122mm apart

Description

Kawasaki Z1 & Z2
Lock Set - Ignition, Seat, Steering

Matched set of locks for the Kawasaki Z1. Includes 2 Kawasaki Keys, and Steering Lock Screw.

Quality Reproduction.

Description

Kawasaki Z1 Gauge Bracket
Replica Gauge Bracket includes mounting hardware & dampers

Replica of OEM 25008-025, 25008-036 & 25008-044

Description

Gauge Cover Set - Black Lower
Z1 1973-75, KZ900 1976, KZ1000 1977-80, KZ650 1977-80, KZ750 1976-79

Black tach and speedo gauge covers.

Description

Kawasaki Z1A & Z1B
Indicator Lamp Cover Set
1974 Z1A & 1975 Z1B

OEM replica made of plastic. Set includes upper & lower cover.

Description

Kawasaki Z1
Side Cover - Left
1972-75 Z1, Z1A, Z1B
ABS Plastic ready to paint

Quality Reproduction. Can be drilled for side panel emblems using marks on the inside.

Description

Kawasaki Z1
Side Cover - Right
1972-75 Z1, Z1A, Z1B
ABS Plastic ready to paint

Quality Reproduction. Can be drilled for side panel emblems using marks on the inside.

Description

Kawasaki Z1, KZ900, KZ1000 - Rear Footrest Assemblies
1972-75 Z1/A/B, 1976 KZ900, KZ1000B1/B2/B3B4/G1

Quality Reproduction with recessed chrome end. Can fit H1D, H2/A/B/C, S2A & S1A if longer bracket 34029-008 (not included) is used. OEM 34028-009, 92076-024, 92022-199, 92043-1464, 550D2012, 33028-011
Sold only as a set.

Description

Petcock - Kawasaki Z1, KZ900

2 fuel outlets 2 out the back of the petcock. On, Off and Reserve settings

Fits Kawasaki Z1 & KZ900
This replacement petcock is NOT a replica of the original.
Replaces OEM part 51023-043

Description

Kawasaki H2, H1, Z1, S1, S3
Gas Cap
H2B/C, H1D/E/F, S1B/C, S3/A, Z1

Replica fuel cap includes latch and 2 pins.

Replaces OEM part 51048-007
Quality Reproduction made in Japan

Description

Kawasaki Z1 Front/Rear Turn Signal Stems - 95mm Long Type
1973-1975 Z1, Z1A & Z1B

Replaces OEM 23078-001

Sold only in pairs.

Description

Kawasaki Z1 Front/Rear Turn Signal Stems - 30mm Short Type
1973-1975 Z1, Z1A & Z1B

Replaces OEM 23078-001

Sold only in pairs.

Description

Kawasaki H1, H2, Z1, KZ Turn Signal
Models listed below

Excellent quality replacement units from K&S - DOT approved to ensure good visibility and safety.

Replaces OEM 23040-034, 23040-029, 23037-034 & 23040-1005
Siingle wire. Single filament bulb

Description

Aftermarket Kawasaki Taillamp Lens

REPLACES PART# 23026-023

Quality aftermarket lens made by Emgo

H2B/C, S1A/B/C, S2A, S3/A, KH250A5, KH400A3-A5, Z1/A/B, G5/A/B/C, KE100A5-A10,

Description

Headlight Shell Assembly - Black
Models listed below

Black shell (body), inner and outer chrome rings, mounting ring and all hardware. 7" headlight not included.

Replaces OEM 23005-1016 & 23005-1015-21

Description

Headlight Rim & Retainer
Models listed below

Inner and outer chrome rings, plus the mounting ring and all hardware. 7" headlight not included.

Replaces OEM 23006-038, 23072-001, 23074-001 & others

Description

Genuine Kawasaki Kickstart Rubber

PART# 13063-004
Geniune Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Kawasaki Z1 & KZ900
Engine Oil Seal - 8 Piece Kit
1973 Z1, 1974 Z1A, 1975 Z1B & 1976 KZ900 A4

Made in Japan to OEM specifications

Kit contains all necessary seals for one engine rebuild.

Description

Kawasaki
Master Cylinder Rebuild Kit
H2/A/B/C, H1B, H1D/E/F, KH500, KZ650B1, Z1/A/B, KZ900A4/A5, KZ400A1, KZ400A1/A2, KZ400/D/D3/D4, KH400A3/A4, S3/S3A, S2/S2A

Contains all components to rebuild one OEM master cylinder. Made in Japan.

Description

Kawasaki
Steering Stem Bearing Set
Models - listed below

Upper: 30 x 48 x 14mm
Lower: 30 x 52 x 17mm

Made in Japan. Tapered bearings are an upgrade from stock balll bearing/race for improved handling & longer life.

EL250B2/B3 Eliminator 88-89, EL250E1/E2/E3 250Hs Eliminator 91-93, EX250E1/E2 Ninja 250R 86-87, EX250F6-F19 Ninja 250R 92-05, EX250F6F Ninja 250R 2006, EX500A1-A7 87-93, EX500D1/D2/D3 Ninja 500 94-96, EX500D4-D12 Ninja 500 97-05, EX500D7F Ninja 500R 06-07, KZ550A1/A2/A3/A4 80-83, KZ550C1/C2/C3/C4 LTD 80-83, KZ550D1 GPz 1981, KZ650B1/B2/B2A/B3 77-79, KZ650C1/C2/C3 Custom 77-79, KZ6650D1/D1A/D2 SR 78-79, KZ650E1/F1 1980, KZ650H1/H2/H3 CSR 81-83, KZ750B1/B2 (2 cylinder) 76-77, KZ750B3/B4 (2 cylinder) 78-79, KZ750E1/E2/E3 80-82, KZ750G1 LTD (2 cylinder) 1980, KZ750H1/H2/H3/H4 LTD 80-83, KZ750K1/K2 LTD (2 cylinder) 83-84, KZ750M1 CSR (2 cylinder) 1982, Z1/A/B 900 73-75, KZ900A4/A5 76-77, KZ900B1 LTD 1976, KZ1000A1/A2/A2A 77-78, KZ1000A3/A3A/A4 MKII 79-80, KZ1000B1/B2/B3/B4 LTD 77-80, KZ1000C1/C1A/C2/C3/C4 Police 78-81, KZ1000D1 Z1R 1978, KZ1000D3 Z1R 1980, KZ1000G1 LTD Classic 1980,

Description

Kawasaki
Handlebar Bolt Kit
Z1, H1, H2, W1, A1, A7 and various others, including some KZ models

Kit Includes:
4 - Chrome Bolts
4 - Washers

Description

Kawasaki Z1, KZ900, KZ1000, KZ650, KZ750
Tachometer Cable

Made in Japan to OEM specifications
Replaces 54018-015

EN450, EN454, KZ650, KZ750H, Z1, KZ900, KZ1000A, KZ1000B, KZ1000C, KZ1000G, KZ1000M

Apporx. 26.5" long from end to end

Description

Kawasaki Z1, KZ900, KZ1000, KZ650, KZ750
Speedometer Cable
1973-75

Made in Japan to OEM specifications
Replaces 54001-040

Z1, KZ900A, KZ1000-A1, KZ1000-A2

Apporx. 34" long from end to end

Description

Kawasaki Z1, KZ900, KZ1000
Throttle Cable (push/pull)

Made in Japan to OEM specifications

Z1, Z1A, Z1B, 1976 KZ900 A4, 1977 KZ1000 A1, 1978 KZ1000 A2, 1979 KZ1000 A3, 1980 KZ1000 A4

Apporx. 43.5" long from end to end

Description

Kawasaki Z1, KZ900, KZ1000
Clutch Cable

Made in Japan to OEM specifications
Replaces 54011-048

Z1, KZ900A, KZ1000-A1, KZ1000-A2

Apporx. 50" long from end to end

Description

Kawasaki Z1 Replica Mirrors
10" Stems (set of 2)

Z1, KZ900, KZ1000 and any other make with a 10mm RH thread. Black satin finish.

EMGO. Replaces OEM: 56002-021

Description

Kawasaki Z1 & KZ
Carburetor Holder Clamps

Z1/A/B 1973-75, KZ900A4/A5 1976-77, KZ1000A1/A2 1977-78, KZ1000A3/A3A/A4 MKII 1979-80, KZ1000B1/B2/B3/B4 LTD 1977-78, KZ1000D1 Z1R 1978, KZ1000D3 Z1R 1980, KZ1000E1/E2 Shaft ST 1979-80

Description

Kawasaki Z1 & KZ
Ignition Tune Up Kit
1973-1981

Made in Japan to OEM specifications

Kit Includes:
2 - Contact Points
2 - Condensers (attached)

Description

Kawasaki H1, H2, Z1, KZ
Spoke & Nipple Kit - Front
1972-75 H1B/D/E/F
1972-75 H2/A/B/C
1973-75 Z1/A/B

OEM replacement
Zinc spokes & silver colored nipples

Description

Kawasaki H2, Z1, KZ
Spoke & Nipple Kit - Rear
1972-75 H2/A/B/C
1973-75 Z1/A/B
1976-77 KZ900A4/A5

OEM replacement
Zinc spokes & silver colored nipples

Description

Kawasaki Clutch & Brake Lever Set
Z1/A/B, H1D/E/F, H2/A/B/C, S3/A

OEM replacements

Description

Kawasaki Clutch Lever
Z1/A/B, H1, H2, S2, S3, A1, A7, MT1, KV, F series, KX, C2, G3, G4, G5, KH, KZ400, KE, KD, KM & others

Replaces OEM part numbers:
46092-021, 46092-016, 46092-015, 46092-014, 46092-005
Fits the following perch:
402-01104

Description

Kawasaki Front Brake Lever
Z1/A/B, KZ900A4/A5, KZ1000A1, KZ1000B1/B2 LTD, KZ750B1/B2, KZ650, KZ400, H1D/E/F, H2/A/B/C, S3/A, KH400A3/A4/A5

OEM replacement

Description

Kawasaki Clutch Lever
1979-80 KZ1000A3/A3/A4 MKII
1981-82 KZ1000J1/J2
1979-82 KZ1300A1/A2/A3/A4

OEM replacement

Description

Kawasaki Z1, KZ Oil Filter
Models listed below

Replaces OEM part 16099-002

Made in Japan to original OEM manufacturer's specifications

Sudco oil filters are made by the same manufacturers who supply oil filters to the OEM mfgs.

Description

Fork Seals
36 mm X 48 mm X 10.5 mm
Various models - listed below

OEM replacement

See application list below

Description

Kawasaki Chrome Grab Rail - Z1, KZ900, KZ1000
1973-1975 Z1, 1976 KZ900, 1977-1978 KZ1000 (except shaft models)

Excellent replica of OEM 35032-022. Will also fit the LTD model but sits lower due to the higher LTD seat.

Description

Kawasaki Z1 Exhaust System
1973-1975 Z1, Z1A & Z1B

Reproduction of the orignal, early Z1-900 exhaust system is an "exact" copy except for the stamped numbering. Set includes 4 exhaust pipes.

Description

Kawasaki Z1 Muffler Mounting Kit
1973-1975 Z1, Z1A & Z1B

Includes chrome mounting flanges, split collars, stud mounting nuts & washers. For use with 6mm exhaust studs.

Description

Kawasaki Z1 Complete Muffler Mounting Kit
1973-1975 Z1, Z1A & Z1B

Kit includes all mounting hardware, clamps, rubber bushings, and exhaust gaskets needed to install the OEM exhaust.

Description

Kawasaki Z1 Rear Shocks
1972-1975 Z1, Z1A & Z1B

Reproduction of the early Z1 shocks OEM 45014-072. Includes reflectors. Sold only in pairs.

13.5" from eye to eye. Correct for the Z1, these shocks fit the KZ900 and early KZ1000 (77-80).

Description

Kawasaki Z1 & H2 Front Brake Pads - Vesrah
1973-1975 Z1, Z1A & Z1B
1972-1975 H2, H2A, H2B & H2C

OEM replacement by Vesrah

Description

Kawasaki Z1 & H2 Rear Brake Shoes - Vesrah
1973-1975 Z1, Z1A & Z1B
1972-1975 H2, H2A, H2B & H2C

OEM replacement by Vesrah

Description

Kawasaki Z1 Seat Assembly - Complete
1973-1975 Z1, Z1A & Z1B

Replica Z1 seat sold as a complete unit with hinges, latch post & rubber dampers. Back of seat is slightly more square than the original.

Click here for various small decals for the Z1A & Z1B.

To order any items on this page, please go to our order page for more details.