H1D & H1E 1973-74
Gas Tank Decals
(2 pcs.)
$20 US pr.
#KH1-734-001

Paint color: Candy Lime

H1D & H1E 1973-74
Side Cover Decals
(Candy Lime Model)
$7 US pr.
#KH1-734-003B

H1E 1974
Gas Tank Decals
(2 pcs.)
$20 US pr.
#KH1-734-001

Paint color: Candy Red

H1E 1974
Side Cover Decals
(Candy Red Model)
$7 US pr.
#KH1-734-003C

H1D 1973
Side Cover Decals
(Lime Green Model)
$7 US pr.
#KH1-734-003D

H1F 1975
Complete Set (Green)
(4 pcs.)
$90 US
#KH1-75-003-CG

Paint color: Candy Green

The H1D & H1E models have a painted stripe.
We offer these H1F stripes in green after numerous requests.

1974 H1E
12 Piece Warning &
Small Decal Set

Decals Included:
1 Flasher decal
1 Break-In decal
1 Caution Battery
1 Daily Safety Checks
2 Helmet Hook
1 Brake Usable Range
1 Important Drive Chain
1 Tire & Load Data
1 Mitsubishi Ign. 6T31371
1 Mitsubishi Ign. 6T31571
1 Master Cylinder

$34 US
#KH1-74-500-WS

Description

Kawasaki 1973 H1D & 1974 H1E
Side Panel Badge

Chrome/Black

H1D 1973
Gauge Faces (decal)
MPH Speedometer
$24 US pr.
#KH1G-73-500G

Not sold separately

Applied over original gauge face. Disassembly of speedometer and tachometer is required. All openings and mounting holes are pre cut to simplify application.

For best results, sanding and repainting original gauge faces black is recommended prior to application of these decals.

H1E 1974
Gauge Faces (decal)
MPH Speedometer
$24 US pr.
#KH1G-74-500G

Not sold separately

Applied over original gauge face. Disassembly of speedometer and tachometer is required. Openings and mounting holes are pre cut to simplify application. Hole for "stop lamp" on tachometer must be trimmed out after installation.

For best results, sanding and repainting original gauge faces black is recommended prior to application of these decals.

H1E 1974
Gauge Faces (decal)
MPH Speedometer
$24 US pr.
#KH1G-74-500GW

Not sold separately

Pearl White gauge faces are for specials.

Applied over original gauge face. Disassembly of speedometer and tachometer is required. Openings and mounting holes are pre cut to simplify application. Hole for "stop lamp" on tachometer must be trimmed out after installation.

For best results, sanding and repainting original gauge faces white is recommended prior to application of these decals.

Safety Checks Decal
H1D & H1E
$10 US
#KH1-734-002

Complete H1D, E & F set

Caution Battery Decal
H1D, H1E, H1F & KH500
$8 US
#KH1-73456-002

Complete H1D, E & F set

DOT 3 Brake Fluid
H1, H2, Z1 and others
-located on master cylinder cap
$7 US
#KAW-MC-001

Silver on a clear backing

Description

Kawasaki H1 & KH500 Rear Shocks
1973-76 H1D, H1E, H1F, KH500

Reproduction H1 shocks OEM 45014-077 & 45014-095. Includes reflectors. Sold only in pairs.

12 5/8" from eye to eye. Correct for all 1973-1976 500 triples.

Description

Kawasaki H1 Seat Trim
1973 H1D, 1974 H1E, 1975 H1F, 1976 KH500A8

Includes mounting hardware. Will not fit early H1.

High quality replica.

Description

Kawasaki H1, H2, S2, F6, F7
Rubber Tank Strap
G5, G5B, G5C, KE100-A10, A5, A6, A8, A9, F6, F7C, F7, S1B, S1C, S2, H1D, H1E, H1F, KH500-A8, H2, H2B, H2C

Replaces OEM part 92072-029 or 92072-050.
Quality Reproduction

Description

Kawasaki
Hand Grip Set
H1B/D/E/F, H2/A/B/C, S1/A/B/C, S2/A, S3/A, KH250, KH400, KZ400 Z1, F5, F6, F7, F8, F9, G3, G4

Genuine Kawasaki part.
Made in Japan.

OEM part numbers 46061-012 & 46075-017

Description

Kawasaki Handlebar Damper Rubber - Set of 4

PART# 92075-092
Quality Reproduction

For H2, H2A, H2B, H2C, H1C, H1D, H1E, H1F, KH500, Z1
Sold only as a set.
Replaces OEM part 92075-275

Description

Kawasaki H2, H1, S Series
Damper Rubber Set - Meters
H1B, H1C, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1A/B/C, KH250, S2, S3/A, KH400

Genuine Kawasaki part.
Made in Japan.

Sold only as a set of 4

Description

Kawasaki H2, H1, S Series
Damper Rubber Set - Meters
H1B, H1C, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1A/B/C, KH250, S2, S3/A, KH400

Quality Reproduction

Sold only as a set of 4

Description

Kawasaki H1, H2, Z1
Damper Rubber
H1D, H1E, H1F, KH500
H2, H2A, H2B, H2C, Z1, Z1A, Z1B

Genuine Kawasaki part.
Made in Japan.

Sold only as a set of 2

Description

Kawasaki H1, S1, S3, F11, G5
Damper Rubber - Fuel Tank
H1D, H1E, H1F
S1, S1B, S1C, KH250
S3, S3A, KH400,

Genuine Kawasaki part.
Made in Japan.

Sold only as a set of 2

Description

Kawasaki H1, H2, S1, S3, KH
Grommet - Side Panel
H2B, H2CH1D, H1E, H1F, KH500
S1B, S1C, KH250
S3, S3A, KH400,

Genuine Kawasaki part.
Made in Japan.

Sold only as a set of 4

Description

Kawasaki H1
Complete Gasket Set
1969-72 H1/A/B/C

Also fits 1973-75 H1D/E/F & 1976 KH500 but does not include ignition cover gasket.

Made in Japan to OEM specifications by Vesrah

Description

Kawasaki H1D
Ignition Unit Mounting Grommet Set

For 1973 H1D ONLY

Kit Includes:
4 - 92075-051 grommets
4 - 92027-103 collars

Genuine Kawasaki parts.

Description

Nikko Horn: Black & Chrome

12 volt 2.5 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 105db

Description

Kawasaki H2, H1, Z1, S1, S3
Gas Cap
H2B/C, H1D/E/F, S1B/C, S3/A, Z1

Replica fuel cap includes latch and 2 pins.

Replaces OEM part 51048-007
Quality Reproduction made in Japan

Description

Genuine Kawasaki Shifter Rubber

PART# 13157-004
Genuine Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Genuine Kawasaki Kickstart Rubber

PART# 13063-004
Genuine Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Kawasaki H2, H1, KZ
Footrest Rubber - Rear
H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1, KH250, S3, S3A, KH400 & several KZ models

Genuine Kawasaki part.
Made in Japan.

Sold only as a pair.

Description

Kawasaki H2, H1, KZ
Footrest Bar - Rear
H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1, KH250, S3, S3A, KH400 & several KZ models

Genuine Kawasaki part.
Made in Japan.

Sold individually
Used with 92076-024 rubber

Description

Kawasaki
H1 Air Filter Element - K&N
H1 - 1969-1975

Fits in stock airbox. Washable/reusable filter that comes pre oiled and ready to use. Increased air flow for improved performance.

Made in USA.

Description

Kawasaki
Master Cylinder Rebuild Kit
H2/A/B/C, H1B, H1D/E/F, KH500, KZ650B1, Z1/A/B, KZ900A4/A5, KZ400A1, KZ400A1/A2, KZ400/D/D3/D4, KH400A3/A4, S3/S3A, S2/S2A

Contains all components to rebuild one OEM master cylinder. Made in Japan.

Description

Kawasaki
Steering Stem Bearing Set
Models - listed below

Made in Japan. Tapered bearings are an upgrade from stock ball bearing/race for improved handling & longer life.

Description

Kawasaki H1
Tachometer Cable - Black
1972-75 H1 & 1976 KH500 A8
Also fits earlier models

Made in Japan to OEM specifications.
Includes rubber grommet

Replaces 54018-007

Description

Kawasaki H1
Starter Cable - Black
1972-75 H1 & 1976 KH500 A8
Also fits earlier models

Made in Japan to OEM specifications

Replaces 54017-031

Description

Kawasaki H1
Complete 4 Piece Crank Seal Set
1969-75 H1/A/B/C/D/E/F & 1976 KH500

Made in Japan to OEM specifications

Kit contains all necessary seals for one crankshaft rebuild.

Description

Kawasaki H1
Complete Engine Oil Seal Kit
1969-75 H1/A/B/C/D/E/F & 1976 KH500

Made in Japan to OEM specifications

Kit contains all necessary seals for one engine rebuild. Including right & left crankshaft end seals.

Description

Kawasaki H1
Complete Engine & Crank Seal Set
1969-75 H1/A/B/C/D/E/F & 1976 KH500

Made in Japan to OEM specifications

Kit contains all necessary engine seals and all crank seals.

Description

Kawasaki H1
Carburetor Rebuild Kit
1973-75 H1D/E/F

Made in Japan to OEM specifications

Kit contains all necessary parts to rebuild one OEM carburetor.
Includes choice of 92.5 & 95 main jets

Description

Kawasaki H2, H1, A7,
Mikuni Carburetor Float
1972-75 H2, 1969-75 H1, 1976 KH500, 1966-71 A7, 1970-71 A7SS

Genuine Mikuni part. Made in Japan.

Sold individually.

Description

Kawasaki H1
Carburetor Cap (set of 3)
H1, H1A, H1B, H1C, H1D, H1E, H1F & KH500

Replaces OEM part 16036-004
Quality Reproduction

Description

Kawasaki
Handlebar Bolt Kit
Z1, H1, H2, W1, A1, A7 and various others, including some KZ models

Kit Includes:
4 - Chrome Bolts
4 - Washers

Description

Kawasaki H1 & KH500
Replica Handlebars
1969-1975 H1/A/B/C/D/E/F
1976 KH500 A8

Replica of the stock handlebars

Replaces OEM part 46003-017 which is correct for all years

Description

Kawasaki H1, H2, Z1, KZ
Spoke & Nipple Kit - Front
1972-75 H1B/D/E/F
1972-75 H2/A/B/C
1973-75 Z1/A/B

OEM replacement
Zinc spokes & silver colored nipples

Description

Kawasaki H1
Spoke & Nipple Kit - Rear
1969-75 H1, H1A, H1B, H1C, H1D, H1E, H1F & 1976 KH500 A8

OEM replacement. Replaces 41026-046
Zinc spokes & silver colored nipples

Description

Kawasaki H1, H2, Z1, KZ
Rim DID - Front 19" Chrome

1969-76 H1/A/B/C/D/E/F KH500, 1972-75 H2/A/B/C, 1973-75 Z1/A/B, 1976-77 Z900A4/A5, 1977-80 KZ1000A1-A4, 1977-79 KZ650B1-B3, 1976-79 KZ750B1-B4
Reproduction Front 19" Wheel Rim. 40 hole 1.85" wide

Description

Kawasaki H1, H2, Z1, KZ
Rim DID - Rear 18" Chrome

1969-76 H1/A/B/C/D/E/F KH500, 1972-75 H2/A/B/C, 1973-75 Z1/A/B, 1976-77 Z900A4/A5, 1977-80 KZ1000A1-A4, 1977-79 KZ650B1-B3, 1976-79 KZ750B1-B4
Reproduction Rear 18" Wheel Rim. 40 hole 2.15" wide

Description

Kawasaki Clutch & Brake Lever Set
Z1/A/B, H1D/E/F, H2/A/B/C, S3/A

OEM replacements

Description

Kawasaki Clutch Lever
Z1/A/B, H1D/E/F, H2/A/B/C, S3/A

OEM replacement

Description

Kawasaki Front Brake Lever
Z1/A/B, KZ900A4/A5, KZ1000A1, KZ1000B1/B2 LTD, KZ750B1/B2, KZ650, KZ400, H1D/E/F, H2/A/B/C, S3/A, KH400A3/A4/A5

OEM replacement

Description

Fork Seals 36 mm X 48 mm X 10.5 mm
H1B/D/E/F 72-75

OEM replacement

Description

Kawasaki H1 500 Piston Kit
Sizes from 60.5mm to 61mm

Wiseco forged piston kit includes 3 pistons, 3 rings, 3 piston pins and 6 retainer clips

Small end bearings sold separately.

Description

Kawasaki H1 500 Piston Kit
Sizes from 61.5mm to 62mm

Wiseco forged piston kit includes 3 pistons, 3 rings, 3 piston pins and 6 retainer clips

Small end bearings sold separately.

Description

Kawasaki H1
Small End Bearing
1969-1975 H1 & 1976 KH500

Replaces OEM part 13033-016

For use on OEM or Wiseco pistons. One bearing required for each piston.

Description

Kawasaki H1 Connecting Rod Kit
1969-1975 H1 & 1976 KH500

Kit includes connecting rod, crank pin bearing, crank pin, thrust washers and piston pin bearing.

Rod kits sold individually. Made in Japan to OEM specifications by Vesrah.

Click here for various small decals for the H1.

To order any items on this page, please go to our order page for more details.